Double motor vibration and six axis acceleration (body feeling).
The fourth gear of vibration can be adjusted without weak or medium strength. Press and hold L, R, ZL and ZR at the same time to adjust the vibration intensity cyclically. Vibration function is not available in Android and IOS. The somatosensory function can only be used on Switch series hosts.
2 With manual/automatic continuous sending function
The A/B/X/Y/L/R/ZL/ZR/key can be used to set continuous transmission. Opening sequence: manual continuous sending → automatic continuous sending → closing. Three gears of continuous engine speed can be adjusted, Turbo+↑/Turbo+↓, increase or decrease speed, and a vibration indicates successful adjustment. Press and hold the minus sign key+↓, shake once, and you can clear the continuous sending setting of all keys with one key.
3 1000mAh lithium battery
The charging time is about 3 hours, and it can be used for more than 16 hours when the measured lamp effect is fully turned on.
4 Two programming keys on the back can map basic function keys
(A/B/X/Y/L/ZL/R/ZR/L3/R3/Up/Down/Left/Right). Each back key can program 1-16 basic function keys.
single mapping (press and hold the minus sign key and one M1/M2 key for about 2 seconds to enter the single programming mode)/
multiple mapping (press and hold the plus sign key and one M1/M2 key for about 2 seconds to enter multiple programming modes), then press the function key (A/B/X/Y/L/ZL/R/ZR/L3/R3/Up/Down/Left/Right), and press the M1/M2 key again to save.
The handle vibrates once, and the signal lamp returns to the normal connection state, that is, the mapping programming of keys is completed. Clear mapping:
① Press and hold the plus key and an M1/M2 key for about 2 seconds, and then press the M1/M2 key after the rocker aperture flashes slowly in white, to clear the single key mapping of M1/M2;
② Press the T key and the minus key at the same time, and the handle vibrates once to clear all key mappings.
5 Double rocker aperture can emit light
Multiple modes are adjustable. On the back,[M]+[-]can cyclically adjust the long bright color of the rocker aperture, and[M]+[+]can cyclically adjust the rocker aperture breathing, laser and closing modes.【M】 +[L3]Yes
Turn on/off the dual rocker aperture light effect.[M]+[R3]can turn on/off the ABXY light effect.[M]+[T]can turn on/off the dual rocker and ABXY key light effect at the same time.[M]+[Left rocker up/down]can adjust the dual rocker aperture brightness.
6 More function
Screen capture/recording and control buttons
7. More function
360° 3D Joysticks and sensitive trigger